Testing the UCC / AVAYA
one-X Speech Application
UCC / Avaya one-X Speech - Avaya IP 600 / G3 / S8700 / S8300 E1 QSIG
7.1
Testing the Application
•
Create a new Outlook profile for the test mailbox.
•
Send two e-mail messages to the newly created Outlook test mailbox.
•
Send two test voice mail messages to the telephone extension associated
with the test mailbox.
•
Create tasks in the Outlook test mailbox Tasks folder.
•
Create a contact in the Outlook test mailbox Contacts folder.
•
Check the properties of your mailbox to ensure that the contact you
created is a valid mailbox address.
•
Call the UCC / AVAYA one-X Speech pilot number for your system
and enter the
•
Record your name and greeting
•
Speak the following voice commands to the UCC / AVAYA one-X
Speech server to verify functionality:
Say "Read my messages." Verify first message read.
Say "Mark this message as read." Verify the message has been read
Say "How many tasks do I have?"
Say "Read my appointments," then follow the prompts.
Say "Send a message," then send a message to yourself
Say "Create an appointment," then follow the prompts.
Say "Read my voice mail." Verify the action.
Say "Delete this message," review Deleted Items folder.
Say "Dial a number" speak a telephone number. While the telephone is
ringing, say "Avaya, come back" When UCC / AVAYA one-X Speech
returns, say "Drop line 1."
Say "Goodbye" and hang up to end the UCC / AVAYA one-X Speech session.
8.0
CONSIDERATIONS
8.1
It is recommended that the incoming /outgoing trunks to the PBX
supporting the UCC / AVAYA one-X Speech application be digital
T1's. This will provide a higher level in clarity when supporting the
speech recognition engine.
The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1
account number and password when prompted.
19
C o n f i d e n t i a l