Avaya IP 600 Configuration Note page 4

PBX Software Requirements
UCC / Avaya one-X Speech - Avaya IP 600 / G3 / S8700 / S8300 E1 QSIG
3.2 PBX SOFTWARE REQUIREMENTS
•
Minimum Software: G3 Version 9.5
•
REQUIRED FEATURE-RELATED SYSTEM PARAMETERS
- ARS
- ISDN-PRI (needed to establish DS1 facility for QSig)
- UDP
- Basic Call Setup
- Basic Supplementary Services
- Supplementary Services w/ Re-routing
Important: If you are using a DCS+/QSIG network you must have
DCS+/QSIG internetworking activated (QSIG Optional
Features in System Parameters) on the PBX collocated with the
UCC / AVAYA one-X Speech system.
Remote PBXs connected in the network must have their ISDN
public-unknown-number format defined correctly to ensure the
remote PBXs present a 10-digit number to UCC / AVAYA
one-X Speech . (Refer to Section 5.0 for more detail).
Note: Definity software 9.5 patch number 3877 "Diversion Leg Qsig
patch" is required to support the prompt "you have reached the
personal assistant for..." on a forwarded (find-me) call.
Verify the phone number field on the UCC / AVAYA one-X
Speech user profiles is entered as the user's 10-digit phone number
(UCC / AVAYA one-X Speech user manager).
Make sure the Definity is passing the 10-digit re-direct number to
UCC / AVAYA one-X Speech (use UCC / AVAYA one-X Speech
reports or UCC / AVAYA one-X Speech logs to view the call).
The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1
4
C o n f i d e n t i a l