Intellisync Leds And Buttons Actions - Pentair INTELLISYNC Installation Manual

IntelliSync™ Control and Monitoring LEDs and Button Action
Button Connection
Action LED
Amber
Green
Green/Red
Red/Blink
Press Green
3-5 sec pulse
Press
once
Press once
(from
Service
mode)
Amber Fast
Blink
Hold Red Blink
during
power up
Mode State
LED
Startup, connecting to
WiFi
WiFi connected with
internet
WiFi connected; no
internet
WiFi configuration
needed
Bluetooth® wireless
technology pairing mode
(Temporary state)
Amber Toggle Service mode
with
timeout
Green Normal (Auto mode)
Red Toggle Service mode
(Permanent hold)
Amber/ Service mode about to
Blink expire
Over The Air (OTA)
firmware update in
progress
Red Reset to Factory Mode.
Blink Caution, reset will
erase the SSID and the
home router network
password.
IntelliSync Control and Monitoring System Installation Guide
Comment
Normal (Briefly)
Unit doesn't have WiFi configura-
tion stored, has timed out.
Temporary state - will change
back to solid Green after Bluetooth
and WiFi are connected to Pentair
Home app.
Disable remote and scheduled
control of equipment
(LED columns show LED state
while in Service mode, and not
about to timeout)
Disable remote and scheduled
control of equipment. Press once
(from Service mode) Amber Toggle
Service mode with timeout
Timeout duration
Three (3) blinks, then goes to
regular display.
9