Connecting Power to IntelliSync Control and Monitoring
System
1.
Plug the IntelliSync 12 VDC, 1.5 AMP power adapter power cord to a 120 VAC
power source. Plug the other end into the IntelliSync unit.
2.
Apply AC power to the IntelliSync unit. Both Mode and Connection LEDs will
illuminate. IntelliSync is ready for configuration and operation.
AC Adapter Power Plug
IntelliSync Control and Monitoring System Power Plug
Connecting a SuperFlo® VS, VST, and SuperMax® VST,
WhisperFloXF® VS and Max-E-ProXF® VS Pump to IntelliSync
SuperFlo VS Pump (P/N 342001)
SuperFlo VST Pump (P/N 342002)
SuperMax VST Pump (P/N 343001)
Legacy pumps (see page 14)
SuperFlo VS Pump (P/N 342000)
SuperMax VS Pump (P/N 343000)
•
IntelliSync provides digital output screw
terminals for pump connections
•
Pump must be wired with constant AC
power from a GFCI breaker
•
IntelliSync must be in Auto mode (Green
LED) and Connection mode (Green LED)
for the Pentair Home app to control
pump speeds (RPM). See page 8.
Continue to next page.
IntelliSync Control and Monitoring System Installation Guide
AC Power Plug
120 VAC outlet)
(connect to
SuperFlo® VS Pump
Digital Output Pump
Screw Terminals
11