Advertisement
External battery pack
BP36V15-2U
compatibility
DC system voltage
36
(VDC)
Battery recharge rate
Less than 4.5 hours from 10% to 90%
(included batteries)
Replacement battery
RBC53
cartridge (internal
UPS battery
replacement)
Battery Access
Battery access door allows hot swap battery replacement without powering connected equipment off
Typical battery
3-6 years, depending on usage
lifespan
VOLTAGE REGULATION
Voltage regulation
Line interactive UPS offers 2 boost levels of brownout correction and a single level of overvoltage adjustment to
description
maintain usable, computer grade output without consuming battery power over an input voltage range of 155 to
274V AC.
Overvoltage correction
Input voltages between 245 and 274V AC are reduced by 9%
Undervoltage
Input voltages between 183 and 199 are boosted by 10%
correction
Severe undervoltage
Input voltages between 156 and 182 are boosted by 21%
correction
Direct pass through
Input voltages between 200 and 244V AC are passed through unchanged
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous
short beeps) and low battery (continuous tone)
Switches
Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
SURGE / NOISE SUPPRESSION
UPS AC suppression
340 joules
joule rating
EMI / RFI AC noise
Yes
suppression
AC suppression
Instantaneous
response time
PHYSICAL
Installation form
Tower
factors supported with
included accessories
Installation form
Wallmount (UPSWM - tower mounting kit)
factors supported with
optional accessories
UPS / Power Module
12.7 x 7.5 x 9.1
dimensions in primary
form factor (height x
width x depth / inches)
(limit 1);
BP36V42-3U
(multi-pack compatible)
Advertisement
