Advertisement
Hot-Swap PDU options
Output AC Waveform (AC Mode)
Output AC Waveform (Battery Mode)
INPUT
Rated input current (Maximum Load)
Nominal Input Voltage(s) Supported
UPS Input Connection Type
UPS Input Cord Length (ft.)
UPS Input Cord Length (m)
Recommended Electrical Service
Input Phase
BATTERY
Full Load Runtime (min.)
Half Load Runtime (min.)
DC System Voltage (VDC)
Battery Recharge Rate (Included
Batteries)
Internal UPS Replacement Battery
Cartridge
Battery Access
Battery Replacement Description
Expandable Runtime
VOLTAGE REGULATION
Voltage Regulation Description
Undervoltage Correction
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display
Switches
Alarm Cancel Operation
Audible Alarm
SURGE / NOISE SUPPRESSION
PDUB15 (2U / 8 5-15R outlets)
Sine wave
PWM sine wave
12A
120V AC
5-15P; Right-Angled
6
1.8
15A 120V
Single-Phase
3 min. (500w)
10 min. (250w)
12
Less than 20 hours from 10% to 90%
RBC51
Battery access door
Hot-swappable, user replaceable batteries
No
Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 89
Input voltages between 89 and 104 are boosted by 14%
Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and replace
battery status; LCD screen rotates for rack/tower viewing
2 Switches control off/on power status and alarm-cancel/self-test operation; dimmer switch controls LCD brightness
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Audible alarm indicates power-failure and low-battery status; alarm can be disabled using PowerAlert software
3 / 5
Advertisement
