Tripp Lite SmartPro SMX1200XLHG Specification Sheet

Model #: SMX1200XLHG
SmartPro Medical Grade 1kVA 230V Line interactive Tower UPS, Extended-run, full isolation, USB and Serial
ports
Description
Tripp Lite's SMX1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation, expandable battery runtime and
intelligent monitoring with unattended shutdown capability. Tested to CE/IEC 60601-1 standard as medical electrical equipment. Built-in isolation
transformer with Faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.
Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers,
inter-networking equipment and other critical loads during commercial power failures. External battery connector allows configuration for up to
several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack
compatible). Line interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V back to normal 230V levels,
saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9)
that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
Applications
CE/IEC 60601-1 compliant UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless
communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support
applications
Package Includes
SMX1200XLHG Medical Grade Tower UPS System
PowerAlert Software and cabling
Warranty information
Instruction manual
Features
Ideal UPS protection for applications in medical patient-care areas where CE/IEC 60601-1 listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge
suppression in all modes
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack
Highlights
1000VA / 1kVA line interactive, extended run tower UPS
Maintains 230V nominal output over an input range of 155 to 274V
Professional features include serial port, IEC320 plug & outlets, built-in
isolation transformer
Input: IEC C14 inlet (230V 5A) / Output: 6 IEC C13 (230V)
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com