Table of Contents
Advertisement
Introduction
This guide describes the function, installation, and operation of the TLI Pro 101. Unless
otherwise stated, the terms "interface" and "TouchLink Pro interface" refer to the TLI Pro 101.
This section provides an overview of the TLI Pro 101:
•
•
•
•
About the TLI Pro 101
The Extron TLI Pro 101 is a TouchLink Interface that works with any Extron IP Link Pro control
processor to allow a third-party touchscreen display to be used as a point of control within
an Extron Pro Series control system. The scaled output supports displays with resolutions up
to 2K.
Events such as button presses on the touchpanel trigger signals to the TLI Pro 101. These
signals are converted to a form that can be understood by an IP Link Pro Control Processor.
When the control processor sends return signals, the TLI Pro 101 outputs a video signal to
the touchpanel showing the status of feedback events. When the third-party touchpanel and
TLI Pro 101 have been set up correctly, they have control system capabilities similar to other
Extron TLP Pro products.
Features
Compatible with third-party touchscreen displays — integrates third-party touchscreen
displays up to 2K or touchpanels with ultra-low radiation emission into Extron systems.
Fast processing and ample memory — allows for quicker configuration uploads and more
storage for GUI pages.
Compatible with all IP Link Pro control processors — providing control for a wide range
of systems.
Compliant with the requirements of Power over Ethernet (PoE) 802.3af, class 3 —
receives power and control over a single Ethernet cable, eliminating the need for a local power
supply (the power injector is sold separately).
Supports HDCP-compliant HDMI — for full-motion video preview and monitoring.
Advanced Extron video signal processing — with a high performance scaling engine.
One USB 2.0 port — for third-party touchscreens or HID support. Increases device
functionality.
Automatic clock synchronization — for accurate time and date display.
Adjustable sleep timer — puts interface into sleep mode.
Fully customizable using Extron control system software — GUI Designer combined
with Global Configurator Plus and Global Configurator Professional.
Supports TouchLink for iPad and TouchLink for Web
Energy-efficient external universal power supply included — provides worldwide
compatibility, low power consumption, and reduced operating costs.
About the TLI Pro 101
Features
Application Diagram
Requirements
TLI Pro 101 • Introduction
1
Advertisement
Table of Contents
