Introduction; About This Guide; About The Ipl T Cr48; Features - Extron electronics IP Link IPL T CR48 User Manual

Ethernet control interface
Hide thumbs Also See for IP Link IPL T CR48:
Table of Contents

Advertisement

Introduction

This section gives an overview of the user guide and describes the Extron IPL T CR48
IP Link Ethernet Control Interface and its features. Topics that are covered include:

About this Guide

This guide describes the function, installation, configuration, and operation of the
IPL T CR48 Ethernet Control Interface.
About the IPL T CR48
The IPL T CR48 is an Ethernet controller designed to be used as one of many nodes in
a distributed control system environment, or as a stand-alone controller allowing legacy
products to link to IP-based networks.
The IPL T CR48 has a single 5-pole captive screw connector for contact closure input and
two 8-pole captive screw connectors for relays. The contact closure input and relay ports
are fully software configurable using a web-based interface connected via an Ethernet port.
The unit hosts its own web pages, stored in blink memory within the device. The
IPL T CR48 supports Telnet, SMTP (Simple Mail Transfer Protocol), ICMP (Internet Control
Message Protocol) or Ping, and DHCP (Dynamic Host Configuration Protocol).
The IPL T CR48 is 1U high and one quarter rack wide (see
options). It can also be mounted near a screen or projector lift.
The interface ships with an external, desktop, 12 V, 1 A power supply that accepts
100-240 VAC input.

Features

About this Guide
About the IPL T CR48
Features
High speed
Constant high speed data throughput, with a 6 Mbit per second transfer
rate
User customizable
You can tailor the on-board web pages with advanced
programmability, e-mail alerts, and storage to suit your needs and requirements. You
can also develop your own web pages using off-the-shelf web authoring software.
GlobalViewer
an be used to manage multiple IP Link products over the web
— C
Direct port access
Use existing software programs to control a device that has
no Ethernet support. Any existing Extron product with a serial control port can be
interfaced with a LAN.
www.extron.com
for mounting
IPL T CR48 • Introduction
1

Advertisement

Table of Contents
loading

Table of Contents