Extron electronics TLI Pro 101 User Manual page 22

3.
If DHCP is disabled, set the unit IP address, subnet mask, gateway address, and DNS
server address.
a. Press the button for the address to be edited. A dialog box opens, showing the
address and a numerical keypad.
Figure 10. Numeric Pad for Setting IP Addresses
b.
Enter the 3-digit value for that octet (leading zeroes in an octet are ignored).
NOTES:
• Octets can have any value between
• If you attempt to enter an invalid number, for example
enter the
89
• When a valid 3-digit value is entered, the next octet is automatically selected.
c. Press to save the changes and return to the
OK
return to the Network screen without saving the changes.
4.
If you have changed any of the values in the
screen, the background color of
Network
the button changes to blue. Press
to apply the new values or press
return to the previous values without saving
the changes. The button returns to gray.
If you have not made any changes, the
and buttons are grayed out.
Apply Revert
and
0
but the cannot be entered.
2
Network
Unsaved
Apply
Revert to
Saved
Figure 11.
TLI Pro 101 • On-screen Menus
.
255
, you are able to
892
screen or press
Cancel
0.0.0.10
0.0.0.10
IP Address, unsaved (top)
and saved (bottom).
to
15