Table of Contents
Advertisement
Calibration Screen
Figure 21.
1.
2.
3.
4.
Touch crosshair to calibrate
800 x 480
Touch Calibration Screen
Press and hold down the recessed front-panel
page 12) for at least 3 seconds.
Release the button. The calibration screen opens to show cross-hairs (see figure 21,
above).
Press the cross-hairs on the screen until they move to another area of the screen.
Repeat step 3 until you have pressed all five sets of cross-hairs (one in each corner and
one in the center of the screen).
The touchpanel exits the calibration screen once the calibration process is completed.
button (see
figure
6,
B
Menu
TLI Pro 101 • On-screen Menus
, on
22
Advertisement
Table of Contents
