Visual Checks - Agilent Technologies BIO-DIS Apparatus 3/7 Operator's Manual

6 Maintenance and Troubleshooting

Visual Checks

C A U T I O N
1 Turn off power to the instrument and remove the power cord.
2 Remove the four screws from the top left panel and remove the panel.
3 Remove the four screws from the left side panel and remove the panel.
4 Inspect the drive belt for unusual wear, fraying, and tension.
5 Replace the left side cover and secure by reattaching the four Phillips screws.
6 Replace the top left cover and secure by reattaching the four Phillips screws.
7 Reconnect the power cord and turn on the instrument.
64
Panels or covers that are retained by fasteners which require the
use of a tool for removal may be opened only by Agilent-trained,
Agilent-qualified, or Agilent-authorized service engineers.
Apparatus 3 / 7 Operator's Manual