Install Ferrite On The Printer Cable; Printer Error Messages - Hach ORBISPHERE 51 Series User Manual

10.5.1 Install ferrite on the printer cable

Refer to the following steps for the ferrite installation on the USB printer cable included with the
LQV161.xx.20000 printer:

10.5.2 Printer error messages

Error message
Printer not available
Paper out
Unknown error
Note: Cyclic measurement mode is automatically disabled when an error occurs. After the error is
corrected, reactivate the cyclic mode in the report configuration option if cyclic measurements are required.
Meaning
Indicates that no printer has been detected. Check that the printer is
connected to the USB-A port and is powered on.
Indicates that the printer is out of paper. In cyclic mode, it is necessary to
activate cyclic printing after reloading paper in the printer. In other modes,
printing can be restarted directly.
An unidentified error has been detected that prevents printing. If this error
occurs, refer to the printer User Manual to identify the cause of the problem.
Communication Menu
89