Ricoh Robin Service Manual page 210

24 June 1994
6. Remove the pinion gear [A] (1 screw).
7. Remove the front [B] and rear [C] side fences.
8. Remove the registration adjustment plate [D] (2 screws) and set it in the
desired position.
NOTE: When reinstalling the pinion gear [A], the lines [E] on the gear
must fit the lines [F] of the rack gears [G].
[A]
[B]
[D]
5-85
COPY QUALITY ADJUSTMENT
[G]
[F]
[E]
[G]
[F]
[C]