Ricoh Robin Service Manual page 143

24 June 1994
[4]
[2]
11. Manually move the first and second scanners to home position.
12. Insert the four positioning pins [A] in the holes on the scanner guide rails
to secure the first and second scanners.
13. Loosen the wire tension bracket fixing screw [B] and the wire tension
adjusting screw [C].
14. Loosen the screw securing the front fixing plate [D]. Place wires [2] and
[4] on the pulleys as shown.
15. Hook the light silver wire [4] onto the front fixing plate and hook the wire
tension spring [E] onto the front fixing plate and the frame projection.
[C]
[E]
[D]
5-17
OPTICS
[A]
[B]