Ricoh Robin Service Manual page 110

SERVICE PROGRAM MODE
NOTE 3: The A151 copier displays the SP mode data in the Copy
Counter. Since the Copy Counter has only 2 digits, "•" is
displayed instead of "1" in the Copy Counter when the data
exceeds "99".
NOTE 4: Make copies or perform free run to display the SP mode data.
A151 copier displays the SP mode data in the Copy Counter.
Since the Copy Counter has only 2 digits, the first digit is
displayed in the Manual Image Density indicator as shown below
(the decimal place is displayed in the Copy Counter):
NOTE 5: – A151 copier –
The A151 copier displays the SP mode data in the Copy
Counter. The first two digits are displayed first. Press the Lighter
key once to display the next two digits and press the Lighter key
one more time to display the last two digits (six digits in total).
– A152 copier –
The first three digits are displayed in the Magnification Indicator.
Press and hold the Lighter key to display the last three digits (six
digits in total).
NOTE 6: Data will vary depending on factory setting. Refer to "FACTORY
SETTING" table located on the upper inner cover.
: "0"
: "1"
For example:
: "2"
: "3"
4-20
24 June 1994
: "4"
: "5"
: "3.83
Copy Counter