Ricoh Robin Service Manual page 135

24 June 1994
[F]
[E]
[G]
[I]
[H]
– To reinstall –
1. Position the 2nd mirror [A]/3rd mirror [B] in the front and rear side plate
cutouts.
NOTE: Make sure that the reflecting surface [C] faces the lens.
2. Set the rear spring plate [D] in the rear side plate cutout while holding the
mirror and set the front spring plate [E] in the front side plate cutout.
NOTE: a) Make sure that the notches [F] in the spring plate are
positioned as shown.
b) Do not touch the reflecting surface with bare hands.
c) When reinstalling the pulley bracket [G] while winding the
exposure lamp harness [H] around the pulley [I], do not bend
or break off the exposure lamp harness.
[D]
[A]
[B]
[C]
5-9
OPTICS