OPTICS
2.4 4TH AND 5TH MIRROR REPLACEMENT
1. Turn off the main switch.
2. Remove the exposure glass. (See Exposure Glass Removal.)
3. Remove the lens cover [A] (2 screws).
4. Remove the 4th and 5th mirror assembly drive gear [B] (1 E-ring).
5. Slide the mirror assembly [C] all the way to the right and remove it.
6. Replace the fourth [D] and fifth [E] mirrors. (The procedure for removing
the mirrors from their brackets is the same as for the second and third
mirrors.)
NOTE: a) Make sure that the reflecting surface faces the lens.
b) Position the spring plates [F] as shown.
c) When reinstalling the 4th and 5th mirror assembly, make sure
that the hooks [G and H] are properly positioned as shown.
[A]
[D]
[E]
5-10
[B]
[H]
[F]
24 June 1994
[C]
[G]