Ricoh FAX2900L Operator's Manual page 187

SMTEN990427_FM.book Page 167 Thursday, September 2, 1999 10:03 AM
- - List of all relevant user parameters
- -
Many bit settings have no effect and are not listed. (Never change these). The set-
tings made at the factory are underlined.
* : Default Settings
SW Digits & Definition
00 0: Default setting for Stamp
1,2 and 3
4, 5: Default resolution when you send a
message
RESOLUTION
HALFTONE
6: Default setting for transmission.
TRANSMISSION
01 7: If you change any of resolution, transmis-
sion mode setting before making a trans-
mission, then
0: The setting(s) will not return to the home
position after the transmission.
1: The setting(s) will return to the home po-
sition after the transmission.
User Parameters
Settings
0:Off*
1: On
Do not change these set-
tings
Bit: 4, 5
0, 0: STANDARD*
1, 0: DETAIL
1, 0:FINE
HALFTONE
0: Memory*
1: immediate
0: Off
1: On*
8
167