Ricoh FAX2900L Operator's Manual page 177

SMTEN990427_FM.book Page 157 Thursday, September 2, 1999 10:03 AM
Problem
Copies are blank.
Copy paper misfeeds occur
frequently.
Stripes on copies.
TELEPHONING
You can't receive phone calls;
the unit only rings once then
goes into receive mode.
You can't receive phone calls;
the unit does not ring.
Required Action
The original must be placed face down in the docu-
ment feeder.
Position the original correctly. See P.15 "Memory
Transmission (Memory Indicator Lit)".
Is the proper paper in the paper cassette?
Paper size and weight must be within the standards
set for this machine.
Is folded, wrinkled, damp, or curled paper in the pa-
per cassette?
Always use dry, undamaged paper.
Is the paper set properly in the paper cassette?
Always load paper correctly. See P.111 "Loading Paper
in the Main Cassette".
Make sure that there is not too much paper in the trays;
do not fill them up over the load limit mark.
Are there any pieces of misfed paper or other foreign
objects in the machine?
Make sure that the paper path is completely clear of
paper and other material after a misfeed.
Are you copying onto recycled paper?
Fan the stack of recycled paper and load it in the paper
tray.
The exposure glass is dirty.
Clean the exposure glass (6). See P.124 "Cleaning the
Rollers and Scanner".
You are in FAX mode.
Change to TEL mode. See P.20 "Receiving Telephone
Calls & Fax Messages (Faxes/Phone Calls)".
The telephone line is not connected.
Connect the modular cord. See P.210 "Connecting up to
the Telephone Line".
Operating Difficulties
7
157