Sewing preparation
Adjusting the needle position up/down
> Push the button «Needle up/down» to lower the needle.
> Push the button «Needle up/down» again to raise the needle.
Adjusting the needle position left/right
There is a total of 11 needle positions. The needle position is indicated by the needle position number in the
display.
> Push the button «Needle left» (1) to move the needle to the left.
> Push the button «Needle right» (2) to move the needle to the right.
Needle stop up/down (permanent)
> Touch the icon «Needle stop up/down (permanent)» to fix the needle position permanently.
> Touch the icon «Needle stop up/down (permanent)» again.
Changing the stitch plate
The stitch plate is marked with vertical, horizontal and diagonal lines in millimeters (mm) and inches (inch).
These markings are helpful for sewing or precise top-stitching.
Prerequisite:
•
•
•
34
– The machine stops with needle position down as soon as the foot control is released or the button
«Start/Stop» has been pressed.
–
The machine stops with needle position up as soon as the foot control is released or the button
«Start/Stop» has been pressed.
The feed dog is lowered.
The machine is switched off and disconnected from the power supply.
The needle and presser foot are removed.