Table of Contents
Advertisement
2.7 Presser foot
Adjusting the presser foot position via the knee lifter of the Free Hand System
> Adjust the sitting height so that the knee lifter can be operated with the knee.
> Push the knee lifter with the knee to the right to raise the presser foot.
– Simultaneously the feed dog is lowered and the thread tension is released.
> Release the knee lifter slowly to lower the presser foot.
Changing the presser foot
> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
> Push the clamping lever up (1).
> Remove the presser foot (2).
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.
Having the presser foot displayed in the User Interface
The recommended presser foot for the selected stitch is displayed. In addition to that, optional presser feet
can be displayed.
> Switch the machine on.
> Select a stitch pattern.
– In the icon «Presser foot display» the recommended presser foot is indicated with a number.
> Touch the icon «Presser foot display».
> With the touchscreen pen/finger scroll up within the range of presser feet to have optional presser feet
displayed.
Sewing preparation
31
Advertisement
Table of Contents
