Table of Contents
Advertisement
9.8 Determining the buttonhole length with the Buttonhole foot with
slide No. 3A
The button can be centered in the yellow circle on the display. By turning the «Upper/Lower
Multifunction knobs», the yellow circle can be enlarged or downsized to determine the diameter of the
button.
Additionally to the diameter of the button, 2 mm are added automatically for the buttonhole length. If the
diameter of the button is 14 mm, the buttonhole length is calculated 16 mm.
Prerequisite:
•
The Buttonhole foot with slide No. 3A is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the buttonhole length».
16.0
> Turn the «Upper Multifunction knob» or the «Lower Multifunction knob» to adjust the buttonhole
length.
9.9 Determining the buttonhole length with the Buttonhole foot No. 3
With the Buttonhole foot No. 3, the length of the buttonhole must be determined via the stitch counter
function. The stitch counter function is suitable for all types of buttonholes. The left buttonhole bead is sewn
forward, the right buttonhole bead is sewn in reverse. If alterations of the balance are made, the stitch
counter function has to be saved for every buttonhole separately.
Prerequisite:
•
The Buttonhole foot No. 3 is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Program the length with the stitch counter».
123
> Sew the desired buttonhole length.
REC
> Stop the machine.
> Push the button «Quick reverse» so that the machine sews the lower bartack and the second bead in
reverse.
> Stop the machine at the height of the first stitch.
> Push the button «Quick Reverse» again so that the machine sews the upper bartack and the securing
stitches.
–
The length of the buttonhole remains saved and every subsequent buttonhole is sewn identically until
the machine is switched off.
Buttonholes
91
Advertisement
Table of Contents
