Sewing Preparation
> Pull the needle down.
> Hold the new needle with the flat side to the back.
> Insert the needle as far as it will go.
> Tighten the fixing screw by hand.
Selecting the Needle in the User Interface
After changing the needle, you can check whether this can be used with the selected stitch plate.
> Tap «Stitch Plate/Needle Selection».
> Select the fitted needle.
Remembering Needle Type and Needle Size
Useful reminder function: So that no information is lost, the needle type and needle thickness can also be
saved on the machine. This means that the saved needle type and needle thickness can be checked at any
time.
> Tap «Stitch Plate/Needle Selection».
> Tap «Needle Selection».
> Select the needle type () of the fitted needle.
> Select the needle type of the fitted needle.
Adjusting the Needle Position Up/Down
> To lower the needle, push the button «Needle position Up/Down».
> To raise the needle, push the button «Needle position Up/Down» again.
Adjusting the Needle Position Left/Right
There is a total of 11 needle positions. The needle position is indicated by the needle position number in the
display.
> To position the needle position to the left, push the button «Needle Position Left» (1).
35