Table of Contents
Advertisement
Sewing preparation
Adjusting the needle position up/down
> To lower the needle, push the button «Needle position Up/Down».
> To raise the needle, push the button «Needle position Up/Down» again.
Adjusting the needle position left/right
There is a total of 11 needle positions. The needle position is indicated by the needle position number in the
display.
> To position the needle position to the left, push the button «Needle position Left» (1).
> To position the needle position to the right, push the button«Needle position Right» (2).
Needle stop up/down (permanent)
> To set the needle stop position permanently, tap «Needle Stop Up/Down».
> Tap «Needle Stop Up/Down» again.
Changing the stitch plate
The stitch plate is marked with vertical, horizontal and diagonal lines in millimeters (mm) and inches (inch).
These markings are helpful for sewing or precise top-stitching.
Prerequisite:
•
•
•
38
– The machine stops with needle position down as soon as the foot control is released or the button
«Start/Stop» has been pushed.
–
The machine stops with needle position up as soon as the foot control is released or the button
«Start/Stop» has been pushed.
The feed dog is lowered.
The machine is switched off and disconnected from the power supply.
The needle and presser foot are removed.
Advertisement
Table of Contents
