Bernina COLLEGE 455 User Manual page 9

Important safety instructions
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8
To operate the machine always use the supplied power cable. USA and
Canada only: Do not connect power plug NEMA 1-15 to circuits exceeding
150 volt-to-ground.
Use this machine only for purposes as described in this manual.
Only use the machine in dry rooms.
Do not use the machine in a damp condition or in a damp environment.
Do not use this machine as a toy. Close attention is necessary when this
machine is used by or near children.
The machine can be used by children older than 8 or by people with reduced
physical, sensory or mental capabilities or if there is a lack of experience and
knowledge how to operate the machine as long as they are supervised or
have been given instruction concerning the responsible use of the appliance
and are aware of the involved risks.
Children are not allowed to play with this machine.
Cleaning and maintencance work must not be carried out by children unless
they are supervised.
Never operate this machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into
water. Contact the nearest authorized BERNINA dealer to arrange further
details.
Only use accessory recommended by the manufacturer.
Don't use this machine when the ventilation openings are blocked. Keep the
ventilation openings and the foot control free from the accumulation of lint,
dust and loose cloth.
Never insert any objects into any openings of the machine.
Do not place any objects on the foot control.
Always use the machine with a foot control of this type LV-1.
Do not operate the machine where aerosol products (sprays) or oxygen are
being used.
Keep fingers away from all moving parts. Special care is required around the
needle.
Neither pull nor push the fabric while sewing. This can cause needle
breakage.
When making any adjustments in the needle area – such as such as
threading the needle, changing the needle, threading the hook or changing
the presser foot – turn power switch to «0».