Calibrating the Buttonhole foot No. 3A
The Buttonhole foot with slide No. 3A and the machine are synchronized with each other and should only be
used together.
Prerequisite:
•
The Buttonhole foot No. 3A is attached.
•
The needle is not threaded.
> Tap «Home».
> Tap «Setup Pogram».
> Tap «Machine settings».
> Tap «Maintenance/updates».
> Tap «Calibrate the Buttonhole foot No. 3A».
> Lower the Buttonhole foot with slide No. 3A.
> To start the calibration, press the «Start/stop» button.
> After the calibration is finished, close the window.
Setup Program
51