Table of Contents
Advertisement
9.11 Sewing the manual 7-step buttonhole with the Buttonhole foot No. 3
The length of the buttonhole is determined manually when sewing. The bartack, eye and securing stitches
are preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by
touching the button «Quick Reverse».
Prerequisite:
•
Buttonhole foot #3 is attached.
> Touch the «Buttonholes» icon.
> Select the Buttonhole #51.
> Touch the «i» dialog icon.
> Touch the «Determine length manually» icon.
man
– Step 1 is activated in the display for the start of the buttonhole.
> Sew the required length of the buttonhole.
– Step 2 becomes active when sewing starts.
> Stop when the required length of the buttonhole or length marking is reached.
> Press the «Scroll down» icon so that step 3 appears.
– The machine sews straight stitches in reverse.
> Stop the machine at the level of the first stitch at the start of the buttonhole.
> Press the «Scroll down» icon so that step 4 appears.
– The machine sews the upper bartack and stops automatically.
> Press the «Scroll down» icon so that step 5 appears.
– The machine sews the second bead.
> Stop the machine at the level of the last stitch of the first bead.
> Press the «Scroll down» icon so that step 6 appears.
– The machine sews the lower bartack and stops automatically.
> Press the «Scroll down» icon so that step 7 appears.
–
The machine secures and stops automatically.
Buttonholes
93
Advertisement
Table of Contents
