Threading The Bobbin Thread - Bernina COLLEGE 455 User Manual

Sewing preparation
> Pull the thread over the thread cutter at the engaging lever (4) and cut.
> Push the engaging lever (5) towards the bobbin.
> To stop the winding process, the engaging lever must be pushed to the right.
> Push the engaging lever towards the bobbin again to continue the winding process.
> Remove the bobbin and cut the thread using the thread cutter at the engaging lever.

Threading the bobbin thread

Prerequisite:
•
•
> Press the bobbin case release at the bobbin case (1).
> Remove the bobbin case.
> Remove the bobbin from the bobbin case.
40
1
2
– The machine winds.
– As soon as the bobbin is full, the machine stops the winding process automatically.
The needle is raised.
The machine is switched off and the bobbin cover is opened.
3
4
5
1