Sewing A Buttonhole Automatically With The Buttonhole Foot With Slide No. 3A - Bernina COLLEGE 455 User Manual

Buttonholes
9.10 Sewing a buttonhole automatically with the Buttonhole foot with
When the Buttonhole foot with slide No. 3A is used, the length of the buttonhole is measured automatically
by the lens on the presser foot. The buttonhole will be exactly duplicated and the machine switches to the
next step automatically when the maximum length is reached. The Buttonhole foot with slide No. 3A is
suitable for buttonholes at a length of 4 – 31 mm, depending on the buttonhole type. The slide of the
Buttonhole foot must lie perfectly flat on the fabric so that the length can be measured accurately.
Programmed buttonholes are the same length and of the same nice look.
Prerequisite:
•
> Touch the icon «Buttonholes».
> Select buttonhole No. 51 – 57, No. 59 or 63.
> Sew the desired buttonhole length.
> Push the button «Quick Reverse» to program the length.
> Push the button «Start/Stop» or press the foot control.
92
slide No. 3A
The Buttonhole foot with slide No. 3A is attached.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.