Reset; Specifications; Amplifier; Tuner - Blaupunkt SAN FRANCISCO CD72 Operating Instructions Manual

RESET

Reset
You can reset all the unit's settings back
to their factory defaults.
Press the MENU button 8.
Press the softkey 4 assigned to
the "SETP" display item.
Press the softkey 4 assigned to
the "NORM" display item.
A confirmation request appears in the
display.
If you are sure you want to reset
the device,
press the softkey 4 assigned to
the "YES" display item.
After you press the softkey, the unit is
switched off and then back on.
If you do not want to reset the de-
vice,
press the softkey 4 assigned to
the "NO" display item.
The menu appears again.

SPECIFICATIONS

Specifications

Amplifier

Output power:
4 x 33 watts sine in accordance
with DIN 45 324 at 14.4 V
4 x 65 watts max. power

Tuner

Wavebands:
FM :
SW :
MW :
LW :
FM frequency response:
CD
Frequency response:

Pre-amp out

4 channels:

Input sensitivity

AUX1 input:
Navi/AUX2 input: 2 V / 10 kΩ
Telephone input: 10 V / 560 Ω
Subject to changes!
87.5 – 108 MHz
5.85 – 6.30 MHz
(49 m band)
531 – 1,602 kHz
153 – 279 kHz
20 - 16,000 Hz
15 - 20,000 Hz
5 V / 10 kΩ
2 V / 10 kΩ
85