Optimising Radio Reception; Setting The Radiotext Display - Blaupunkt SAN FRANCISCO CD72 Operating Instructions Manual

Selecting a programme type and
starting seek tuning
The PTY menu comprises several pag-
es on which the known programme
types are displayed. To browse through
the PTY menu's pages,
repeatedly press the NEXT button
3 until the required programme
type appears alongside one of the
softkeys.
Press the softkey 4 assigned to
the required programme type.
Move the joystick 7 up/right or
down/left to start seek tuning.
The next receivable station correspond-
ing to your selected programme type will
then be tuned into.
If no station is found that corresponds
to the selected programme type, you will
hear a beep sound and "NO PTY" ap-
pears briefly in the display. The radio
will then retune to the station that was
received last.
Note:
If you want to switch back to the
programme types display,
briefly move the joystick 7 in any
direction.

Optimising radio reception

Treble reduction feature during
interference (HiCut)
The HiCut function improves the sound
during poor radio reception. If interfer-
ence occurs, the treble is automatically
reduced thus reducing the interference
level.
Setting HiCut
Press the TUNER button < in ra-
dio mode.
The first page of the radio functions
menu is displayed.
Press the NEXT button 3.
Press the softkey 4 assigned to
the "HCUT" display item.
Move the joystick 7 up/right or
down/left to adjust the HiCut.
"HICUT 1" means a minor reduction will
be made, and "HICUT 2" means a max-
imum reduction of the treble level and
interference level will be applied.
Press the joystick OK 7 or the
MENU button 8 to close the
menu.
The settings are saved.

Setting the radiotext display

Some stations use the RDS signal to
broadcast scrolling texts known as ra-
diotexts. You can allow radiotexts to be
displayed or you can block them.
Press the TUNER button < in ra-
dio mode.
The radio functions menu appears in the
display.
RADIO MODE
67