Cleaning The Registration Roller - Ricoh AP2600 Operating Instructions Manual

Troubleshooting
Cleaning the Registration
Roller
If the registration roller is dirty, a mis-
feed might occur. In this case, clean
the roller as follows:
R WARNING:
• Be sure to turn off the power
switch and wait for about 30
minutes before cleaning the
registration roller. Not waiting
for the printer to cool down
can result in a burn.
R CAUTION:
• The inside of the printer be-
5
comes very hot. Do not touch the
parts with a label indicating the
"hot surface", otherwise it could
cause a burn.
A
Turn off the power switch.
B
Open the front cover by pushing
the front cover release button.
94
C
Pull the toner cartridge out of the
printer by holding the grips of the
cartridge.
Note
Do not hold the toner cartridge
upside down or stand it verti-
cally.
Do not put the toner cartridge
on an unstaple or tilted surface.
D
Wipe around the metallic regis-
tration roller by turning with a
soft damp cloth.
Important
Do not use chemical cleaner or
organic solvent such as thinner
or benzene.