Accessing The System Control Center For Addressing; Information; System Control Center Home Page; Open A Web Browser On A Computer Connected To The Hn7000S Remote Terminal - Hughes HN7000S Manual

Accessing the System
Control Center for
addressing information
Appendix A • Configuring Windows network settings manually for static IP address
60
1037076-0001 Revision C
Perform the following steps to access the System Control Center
for addressing information.
1. Open a web browser on a computer connected to the
HN7000S remote terminal.
2. Type
192.168.0.1
field and press E
NTER
page appears as shown in Figure 50.
Figure 50: System Control Center Home page
3. Click the System Info indicator. The System Information
page appears as shown in Figure 51.
4. Locate the
LAN1 IP Address and LAN1 Subnet Mask fields
on the System Information page and record those numbers.
5. Click , then click
Help
the question How do I configure IP addresses on my
computer?
6. In the answer that appears, click on
of the list provides the range of appropriate IP addresses you
can use. Record them. The rest of the list is not relevant to the
instructions in this appendix.
in the browser's address or location
. The System Control Center home
Frequently Asked Questions
Click here
. Click on
. The first line