Table of Contents
Advertisement
Uninstalling a DW4000
Removing ICS software
from your computer
Chapter 2 • Uninstalling your current remote terminal
4
1037076-0001 Revision C
The process of uninstalling a DW4000 consists of the following
tasks:
• Removing Internet connection sharing (ICS) software from
• Removing DIRECWAY software from your computer
• Disconnecting the indoor receive unit (IRU) and indoor
Determine which operating system is installed on your computer
and select the appropriate procedures to remove the ICS software
from the computer:
Windows XP
1. Open My Computer or Windows Explorer.
2. Right-click
3. Highlight each Local Area Connection until you find the one
4. Right-click on the Local Area Connection that corresponds to
5. Select the Advanced tab and Click Settings.
6. At the Windows Firewall General tab, select ON and check
7. Click OK to close the Windows Firewall dialog.
8. Click OK to close the Local Area Connection Properties
Windows 2000
1. Click
2. Highlight each Local Area Connection until you find the one
3. Right-click on the Local Area Connection that corresponds to
4. At the dialog that appears, select the Sharing tab.
5. Uncheck the check box next to
6. Click OK.
7. Close the Network and Dial-up Connections window.
your computer (if you are not using ICS, you can skip this
task)
transmit unit (ITU) stack from your computer
Windows XP on page 4
Windows 2000 on page 4
Windows 98 SE on page 5
Windows Me on page 5
My Network Places
that is listed as the Satellite Receiver Adapter.
the Satellite Receiver Adapter and click Properties. The
Local Area Connection Properties dialog appears.
the Don't Allow Exceptions check box.
dialog.
→
→
Start
Settings
The Network and Dial-up Connections dialog box appears.
that is listed as the Satellite Receiver Adapter.
the Satellite Receiver Adapter and click
Sharing for this connection
and select
Properties
Network and Dial-up Connections
Properties
Enable Internet Connection
.
.
.
.
Advertisement
Table of Contents
