TEC B-210 SERIES Owner's Manual page 35

7. ISSUING THE MEDIA
3) After printing the receipt, press the
REPRINT button to feed it to the
position where it is easily cut. Each
time the REPRINT button is pressed,
the receipt is fed for 20 mm.
4. Trim off the printed media upward or
downward with the cutter.
NOTE: Do not pull the media toward
the feed direction, as this will
misalign the print position of
the next media.
Media
7- 3
EM1-33043D
7. ISSUING THE MEDIA
Fig. 7-2