TEC B-210 SERIES Owner's Manual page 31

5. LOADING THE MEDIA
3. Turn on the printer and press the
REPRINT button. The printer will
align the print start position.
NOTES:
1. Be sure to take up any slack in the
media roll before closing the media
cover. An incompletely closed cover
will cause a media skew, print position
misalignment, poor print quality, paper
jam, etc.
2. If the media cover is closed while the
printer is turned on, the printer will
automatically feed a label to align the
print position.
5. LOADING THE MEDIA
5- 5
EM1-33043D