Table of Contents
Advertisement
4. INSTALLING THE PRINTER
2) Load a fully charged battery into the
printer.
NOTE: Remove the battery pack cover
Battery Pack
Cover
3) Close the battery cover completely.
4) Turn on the printer and the status
indicator will blink, then go off. The
status indicator which does not light
or stays lit indicates that the battery is
uncharged.
from the battery, and then load
the battery in the correct
orientation as indicated in the
following figure.
4.1 LOADING THE BATTERY
4- 2
EM1-33043D
Battery
Fig. 4-2
Advertisement
Table of Contents
