Attaching A Remote Alarm - ResMed Astral Series Clinical Manual
Hide thumbs
Also See for Astral Series:
- Quick start manual ,
- User manual (380 pages) ,
- Clinical manual (168 pages)
Table of Contents
Advertisement
Accessories
Attaching a remote alarm
The ResMed Remote Alarm II has been designed for use with Astral devices. The Remote Alarm II alerts
you to an alarm that requires immediate attention. It triggers an audible and visual alarm when an alarm
is triggered on the Astral device. For full instructions on using the Remote Alarm II, see the User Guide
that comes with that device.
To connect the Remote Alarm II to the Astral device:
1. Connect one end of the alarm cable to the (3 pin) input connector on the remote alarm.
2. Connect the other end to the (5 pin) output connector located at the rear of the Astral device.
CAUTION
To remove the cable, pull firmly on the connector. Do not twist.
56
Advertisement
Table of Contents
Troubleshooting
