Table of Contents
Advertisement
Memory
Configuration
Mapping memory
H8/338 emulator
H8/329 emulator
Caution
The memory configuration questions allow you to select the monitor
type and to map memory. To access the memory configuration
questions, you must answer "yes" to the following question.
Modify memory configuration?
The emulation memory consists of 64K bytes, mappable in 128 byte
blocks. You can define up to 16 different map terms. The emulation
memory system does not introduce wait states.
The memory mapper allows you to characterize memory locations. It
allows you to specify whether a certain range of memory is present in
the target system or whether you will be using the emulation memory
for that address range. You can also specify whether the target system
memory is ROM or RAM, and you can specify that emulation memory
be treated as ROM or RAM.
The default memory mapping is shown below.
emulation ROM (erom)
0 - BFFF
0 - 7FFF
The default emulator configuration maps location 0 hex through 3fff
hex as emulation ROM and location fd80 hex through ff7f hex as
emulation RAM. This must be needed when you use the H8/338
internal ROM and RAM.
emulation RAM (eram)
F780 - FF7F
FB80 - FF7F
Configuration the Emulator 4-5
Advertisement
Table of Contents
