Saving A Configuration; Loading A Configuration - HP 64793 Series User Manual

Saving a
Configuration
Loading a
Configuration
4-12 Configuration the Emulator
The last configuration question allows you to save the previous
configuration specifications in a file which can be loaded back into the
emulator at a later time.
Configuration file name? <FILE>
The name of the last configuration file is shown, or no filename is
shown if you are modifying the default emulator configuration.
If you press <RETURN> without specifying a filename, the
configuration is saved to a temporary file. This file is deleted when
you exit the Softkey Interface with the "end release_system" command.
When you specify a filename, the configuration will be saved to two
files; the filename specified with extensions of ".EA" and ".EB". The
file with the ".EA" extension is the "source" copy of the file, and the
file with the ".EB" extension is the "binary" or loadable copy of the file.
Ending out of emulation (with the "end" command) saves the current
configuration, including the name of the most recently loaded
configuration file, into a "continue" file. The continue file is not
normally accessed.
Configuration files which have been previously saved may be loaded
with the following Softkey Interface command.
load configuration <FILE> <RETURN>
This feature is especially useful after you have exited the Softkey
Interface with the "end release_system" command; it saves you from
having to modify the default configuration and answer all the questions
again.
To reload the current configuration, you can enter the following
command.
load configuration <RETURN>