Selecting the
Measurement System
Display or Another
Module
2-32 Getting Started
emul700 command. When you enter the Softkey Interface via pmon
and MEAS_SYS, only one window is permitted.
Refer to the Softkey Interface Reference manual for more information
on using the Softkey Interface with window systems.
When you enter the Softkey Interface via pmon and MEAS_SYS, you
have the option to select the measurement system display or another
module in the measurement system when exiting the Softkey Interface.
This type of exit is also "locked"; that is, you can continue the
emulation session later. For example, to exit and select the
measurement system display, enter the following command.
end select measurement_system
<RETURN>
This option is not available if you have entered the Softkey Interface
via the emul700 command.