Table of Contents
Advertisement
4-2 Configuration the Emulator
Memory Configuration:
Mapping memory.
Emulator Pod Configuration:
Selecting the microprocessor to be emulated.
Selecting the processor operation mode.
Enabling /NMI input from the target system.
Enabling /RES input from the target system.
Setting up the reset value for the stack pointer.
Debug/Trace Configuration:
Enabling breaks on writes to ROM.
Specifying tracing of foreground/background cycles.
Enabling tracing bus release cycles.
Simulated I/O Configuration: Simulated I/O is described in the
Simulated I/O reference manual.
Interactive Measurement Configuration: See the chapter on
coordinated measurements in the Softkey Interface Reference manual.
External Analyzer Configuration: See the Analyzer Softkey
Interface User's Guide.
Advertisement
Table of Contents
