Table of Contents
Advertisement
From the HP-UX Shell
All Rights Reserved. Reproduction, adaptation, or translation without prior
written
permission
Use , duplication , or disclosure
restrictions as set forth in subparagraph (c) (1) (II) of the Rights
in Technical Data and Computer Software clause at DFARS52.227-7013.
HEWLETT-PACKARD Company , 3000 Hanover St. , Palo Alto, CA94304-1181
STATUS:
Loaded configurationfile_____________________________________...R....
run
trace
2-8 Getting Started
If this command is successful, you will see a display similar to figure
2-3. The status message shows that the default configuration file has
been loaded. If the command is not successful, you will be given an
error message and returned to the pmon User Interface. Error
messages are described in the Softkey Interface Reference manual.
For more information on creating measurements systems, refer to the
Softkey Interface Reference manual.
If /usr/hp64000/bin is specified in your PATH environment variable,
you can also enter the Softkey Interface with the following command.
$ emul700 <emul_name> <RETURN>
The "emul_name" in the command above is the logical emulator name
given in the HP 64700 emulator device table
(/usr/hp64000/etc/64700tab).
HP64793-19031 A.04.00 25Oct92
H8/338 EMULATION SERIES 64700
A Hewlett-Packard Software Product
Copyright Hewlett-Packard Co. 1992
is prohibited, except as allowed under copyright laws.
RESTRICTED RIGHTS LEGEND
by the
step
display
Figure 2-3. Softkey Interface Display
Government is subject to
modify
break
end
---ETC--
Advertisement
Table of Contents
