Menu: Settings - Siemens SINUMERIK 840Di sl Commissioning Manual

NC Commissioning with HMI Advanced
11.11 NC/PLC Diagnosis
11.11.2

Menu: settings

Operating path
The menu for the SINUMERIK 840Di sl-specific settings is located in the following operating
path:
● Operating area switchover > IBN > NC/PLC Diagnosis > Settings
Figure 11-35 Menu: settings
Modifying data
When switching to the menu the data displayed become read-only. To change the data,
press the "Change" softkey first.
490
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual