Servicecenter; Activating - Siemens SINUMERIK 840Di sl Commissioning Manual

Power-On and Power-Up

5.5 ServiceCenter

5.5 ServiceCenter
The ServiceCenter is used to create, restore and manage partition and hard disk images.
With the SINUMERIK 840Di sl, the startup mode of NCK and PLC can also be specified via
the ServiceCenter.
The ServiceCenter is intended for the machine manufacturer/service personnel.
5.5.1

Activating

Proceed as follows to enable the Service Desktop:
1. Restart the PCU, e.g. via Power Off/On.
2. While starting up the PCU, press the key "↓" (Cursor Down) in the selection image for the
3. Enter a password for protection levels 0-2:
Protection level
0
1
2
1. Press the Enter key for immediate activation of the selection or wait until the selection is
142
operting system to be started. (The selection screen is displayed immediately after the
booting of the PCU.)
Password
Reserved
SUNRISE (default)
EVENING (default)
started automatically after the preset wait time has elapsed.
Area
Siemens
Vendor
Commissioning, service
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual