Parameterizing The Profibus Interface (X102) (Optional) - Siemens SINUMERIK 840Di sl Commissioning Manual

6.3.6

Parameterizing the PROFIBUS interface (X102) (optional)

When you have completed the "Properties - PROFIBUS DP Interface" dialog box (see
Subsection "Parameterizing the PROFIBUS interface (X101)" (Page 165)) the 840Di sl Rack
is displayed in the Station window.
Figure 6-6 HW Config: SINUMERIK 840Di sl Rack
To parameterize the PROFIBUS interface (X102) as for slot X1, set the following parameters:
● Interface type
● Transmission rate
By double-clicking the module
dialog of MPI/DP.
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Suchen:
Profil:
MPI/DP X1
, slot in the 840Di sl-rack, open the properties
PLC commissioning
6.3 Creating a SIMATIC S7 project
167