Sfp Port Leds - Avaya VSP 7000 Series Installing

Preparations for network connectivity
Vendor
HP
HP
HP
HP
If you use a verified third-party device, the show interface gbic command output displays the
vendor SEEPROM data and the cable type.
Note:
The SEEPROM data output for third-party cables might be different than the model number.
Avaya devices are recommended to provide maximum compatibility and support for the VSP
7000 Series.
Related Links

SFP port LEDs

on page 56
Installing SFP transceivers
SFP port LEDs
The switch front panel contains transmit (Tx) and receive (Rx) LEDs for each port. The following
table describes the SFP port LED status.
LED
Tx
Rx
Installing Avaya VSP 7000 Series
56
Model
J9286B
487652–B21
487655–B21
487963–B21
on page 57
State
Off
Emerald (Solid)
Emerald (Flashing)
Amber (Solid)
Amber (Flashing)
Amber (Blinking)
Off
Emerald (Solid)
Comments? infodev@avaya.com
Details
HP SFP+ direct attach copper cable — 33 feet (10
meters)
HP Blade Systems C-Class SFP+ direct attach cable —
3.3 feet (1 meter)
HP Blade Systems C-Class SFP+ direct attach cable —
10 feet (3 meters)
HP Blade Systems C-Class SFP+ direct attach cable —
16 feet (5 meters)
Description
No SFP or SFP+ transceiver
detected.
SFP+ detected and link
established.
SFP+ link established and
transmitting.
SFP detected and link established.
SFP link established and
transmitting.
Tx and Rx blink slow, indicating
port is disabled.
No SFP or SFP+ transceiver
detected.
SFP+ detected and link
established.
August 2014