Table of Contents
Advertisement
An example of finding the physical location for RAID controller resource to be replaced (sissas2 in this
example) follows:
1. Use the AIX sissasraidmgr command to find all the SES resources connected to the specified RAID
controller:
# sissasraidmgr -Ll sissas2 -j3
Information similar to the following is displayed:
2. Use the AIX lscfg command to find the serial number of the RAID controller:
lscfg -vl sissas2
Information similar to the following is displayed:
3. Use the AIX lscfg command to find which SES serial number matches the RAID controller serial
number:
lscfg -v1 ses3
Information similar to the following is displayed:
4. Use the hardware location code in the matching SES to identify the physical location of the RAID
controller.
Determining the ERM location from the RAID controller location when using IBM i:
Learn how to use the IBM i operating system to determine the physical location of the RAID controller
on the enclosure RAID module (ERM) when you have the RAID controller logical location code.
Use one of the following methods to determine the RAID controller physical location:
v "Finding the port of the GX adapter" on page 38
v "Using the operating system tools" on page 38
37
Service information
Advertisement
Table of Contents
