Cabling The 5887 Disk Drive Enclosure To An Edr1 Pcie Storage Enclosure That Is Attached To An 8412-Ead, 9117-Mmc, 9117-Mmd, 9179-Mhc, Or 9179-Mhd - IBM Power System 5888 Service Information

Pcie storage enclosures
Table of Contents

Advertisement

Figure 36. Four EDR1 PCIe storage enclosures connected to two 8412-EAD, 9117-MMC, 9117-MMD, 9179-MHC, or
9179-MHD systems by using four FC 1914 PCIe2 GX++ adapters and eight PCIe cables
Cabling the 5887 disk drive enclosure to an EDR1 PCIe storage enclosure that is
attached to an 8412-EAD, 9117-MMC, 9117-MMD, 9179-MHC, or 9179-MHD
Use this information as a guide for cabling your disk drive enclosure to your PCIe storage enclosure.
Note: The IBM i operating system does not support attaching more than one 5887 disk drive enclosure to
an EDR1 PCIe storage enclosure.
Figure 37 on page 32 shows one 8412-EAD, 9117-MMC, 9117-MMD, 9179-MHC, or 9179-MHD with one
5887 disk drive enclosure connected to one EDR1 PCIe storage enclosure by using two SAS EX cables.
31
Service information

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power system edr1

Table of Contents